Effects of Material Properties and Punch Tip Radius on Spring-Forward in 90 degrees V Bending Processes


Hakan D., Mustafa O. , Murat S.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, vol.20, no.10, pp.64-69, 2013 (Journal Indexed in SCI) identifier identifier

  • Publication Type: Article / Article
  • Volume: 20 Issue: 10
  • Publication Date: 2013
  • Doi Number: 10.1016/s1006-706x(13)60178-8
  • Title of Journal : JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
  • Page Numbers: pp.64-69

Abstract

Bending process is one of the most significant fields of application of sheet metal die. Sheet metals are exposed to some spring-back or spring-forward depending on elastic deformation following bending process. S235JR (1. 0038) materials having a thickness of 4 mm were bent with 90 degrees punches having 5 different tip radiuses. The bending process was carried out by making the punch waited on the material for 30 s (30 s wait bending) and by removing the punch without waiting (direct bending). Specimens were prepared in three forms as non-heat-treated, normalized and tempered. At the same time, all experiments were performed at a deformation speed of 25 mm/min. As a result, it was determined that as punch tip radius increased, the amount of spring-forward decreased. Although normalizing process applied to specimens increased the amount of spring-forward, tempering process decreased it. The amount of spring-forward was decreased in 30 s wait bending process.