Preparation and investigation of binder-free TiO2 paste for low temperature flexible DSSC applications


Cavus H., Şahingöz R.

Journal of Optoelectronics and Advanced Materials, cilt.23, sa.7, ss.359-365, 2021 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 23 Sayı: 7
  • Basım Tarihi: 2021
  • Dergi Adı: Journal of Optoelectronics and Advanced Materials
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Compendex
  • Sayfa Sayıları: ss.359-365
  • Anahtar Kelimeler: Flexible DSSC, Binder-free TiO2 paste, Fill factor, Power conversion efficiency, SENSITIZED SOLAR-CELLS, LOW-COST, FILMS, PERFORMANCE, FABRICATION, ELECTRODE, ENHANCEMENT, PHOTOANODE, EFFICIENCY, POLYMER
  • Yozgat Bozok Üniversitesi Adresli: Evet

Özet

© 2021 National Institute of Optoelectronics. All rights reserved.In this study, for the production of flexible photoanodes, a binder-free TiO2 paste has been prepared. The photoelectrodes fabricated with this paste at low temperature have been achieved a very good contact compared to the results prepared by conventional high temperature procedures. These flexible photoanodes have been sensitized with Ruthenizer N719 dye at 24 hours and this flexible photoanode and Pt counter electrode have been combined. The characteristic values of Jsc, Voc, FF and conversion efficiency (n) have been obtained 20.9 mA/cm2, 671 mV, 0.57, and 7.95 % respectively for the flexible dye sensitized solar cell (DSSC).