Yayınlar & Eserler

Yayın Ağı
Makaleler 26
Tümü (26)
SCI-E, SSCI, AHCI (17)
SCI-E, SSCI, AHCI, ESCI (18)
ESCI (1)
Scopus (19)
TRDizin (5)
Diğer Yayınlar (2)

1. Effective Cross-section Design of Hollow Intermediate Cylindrical Columns based on Solid Long Cylindrical Reference Columns

Nuraliyev M., Dündar M. A.
STRUCTURAL ENGINEERING INTERNATIONAL: JOURNAL OF THE INTERNATIONAL ASSOCIATION FOR BRIDGE AND STRUCTURAL ENGINEERING (IABSE) , cilt.1, sa.1, ss.1-16, 2026 (SCI-Expanded, Scopus)

2. Investigation of the effects of heavy and light welding on buckling behavior of square hollow sections: Parametric study

Özenç O., Dündar M. A.
Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , cilt.14, sa.4, ss.1647-1663, 2025 (TRDizin) Sürdürülebilir Kalkınma identifier

3. Examining the effect of dilation angle on the flexural response of amorphous polymers using finite element analysis

Dundar M. A., Ozenc O.
MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES , cilt.1, sa.1, ss.1-14, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier

4. A refined approach for determining local buckling coefficients of box sections with flanges thicker than webs under axial compression

Dündar M. A., Nuraliyev M.
MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES , cilt.1, sa.1, ss.1-18, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier

5. Farklı et kalınlıklarına sahip eksenel basınç altındaki kutu kesitlerin yerel burkulma katsayılarının belirlenmesi için yeni bir yaklaşım

Nuraliyev M., Özenç O., DUNDAR M. A., AKYILDIZ H. K.
Journal of innovative engineering and natural science (Online) , cilt.5, sa.2, ss.635-651, 2025 (TRDizin) Sürdürülebilir Kalkınma identifier

6. Burulmaya maruz kalan dairesel içi boş kesitlerin efektif en kesit tasarımı

Nuralıyev M., Akyıldız H. K., Dündar M. A.
Bozok Journal of Engineering and Architecture , cilt.4, sa.1, ss.32-55, 2025 (Hakemli Dergi) Sürdürülebilir Kalkınma

7. A novel analytical method for local buckling check of box sections with unequal wall thicknesses subjected to bending

Nuralıyev M., Dundar M. A., Akyildiz H. K.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , cilt.32, sa.8, ss.1683-1706, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier

8. Experimental and numerical investigation of the impact of hemp particle addition on the bending rate-dependent behavior and damage parameters of acrylonitrile-butadiene-styrene

Dündar M. A., Ozenc O., Sahin D. E.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART L: JOURNAL OF MATERIALS: DESIGN AND APPLICATIONS , cilt.1, sa.1, ss.1-30, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier

9. Comparative assessment of element types for evaluating local elastic buckling behavior of rectangular hollow sections using finite element analysis

Dündar M. A., Ercan K., Özenç O.
Journal of innovative engineering and natural science (Online) , cilt.5, sa.1, ss.128-147, 2025 (TRDizin) Sürdürülebilir Kalkınma identifier

10. Assessing the effectiveness of the linear Drucker–Prager material model in predicting the mechanical behavior of acrylonitrile–butadiene–styrene (ABS) under multiaxial loading conditions

Dündar M. A.
POLYMER ENGINEERING AND SCIENCE , cilt.1, ss.1-28, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier

11. Investigating the Flexural Behavior of Ultra-High-Molecular-Weight Polyethylene at a Low Bending Rate: Experimental and Numerical Study

Ercan K., Dündar M. A., Akyildiz H. K.
Mechanics of Solids , cilt.59, sa.8, ss.3968-3984, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier

12. Determination of optimal dimensions of polymer-based rectangular hollow sections based on both adequate-strength and local buckling criteria: Analytical and numerical studies

Nuralıyev M., Dundar M. A., Sahin D. E.
MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES , cilt.52, sa.2, ss.1159-1189, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

13. Exploring the strain rate influence on shear yield behavior of acrylonitrile-butadiene-styrene: Experimental and numerical study

Dundar M. A.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS , cilt.0, sa.0, ss.1-30, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier

14. A Novel Approach for the Optimum Cross-Section Design of Thin-Walled Box Section Beams Subject to Oblique Bending Based on Both Adequate-Strength and Local Stability Conditions.

Nuraliyev M., Dundar M. A., Akyildiz H. K., Sahin D. E.
Structures , cilt.67, sa.1, ss.1-29, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier

15. Parametric study on the assessment of the local buckling behavior of perforated square hollow sections with non-uniform wall thickness under axial compression

Dündar M. A., Nuraliyev M.
Journal of innovative engineering and natural science (Online) , cilt.4, sa.2, ss.326-353, 2024 (TRDizin) Sürdürülebilir Kalkınma identifier

16. Examination of compressive and flexural behaviors of acrylonitrile-butadiene-styrene filled with hemp fiber particles

Ozenc O., Dündar M. A., Sahin D. E.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS , cilt.37, sa.2, ss.743-771, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier

17. Determination of Optimal Cross-Section Dimensions of Rectangular Hollow Sections Under Oblique Bending: Analytical and Numerical Study.

Nuraliyev M., Dündar M. A.
journal of ınnovative engineering and natural science , cilt.4, sa.1, ss.198-219, 2024 (TRDizin) identifier

18. A novel approach for the determination of optimal diameter of shaft with keyway: Analytical and numerical study

Nuraliyev M., Dündar M. A., Akyildiz H. K., Sahin D. E.
Mechanics Based Design of Structures and Machines , cilt.52, sa.8, ss.5610-5636, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier

19. Investigation of effects of added hemp fiber particles on tensile behavior of acrylonitrile-butadiene-styrene

Ozenc O., Dundar M. A., Sahin D. E.
JOURNAL OF COMPOSITE MATERIALS , cilt.57, sa.15, ss.2421-2436, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

20. Numerical prediction of mechanical behavior of acrylonitrile-butadiene-styrene under three-point bending and impact loadings by Anand-Gurtin material model

Dündar M. A., Dhaliwal G. S., Nuralıyev M., Ayorinde E. O.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.236, sa.22, ss.11024-11040, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

21. Tensile, compression, and flexural characteristics of acrylonitrile-butadiene-styrene at low strain rates: Experimental and numerical investigation

Dundar M. A., Dhaliwal G. S., Ayorinde E., Al-Zubi M.
POLYMERS & POLYMER COMPOSITES , cilt.29, sa.5, ss.331-342, 2021 (SCI-Expanded, Scopus) identifier identifier

22. Experimental and numerical investigation on flexural behavior ofacrylonitrile-butadiene-styrenepolymer

Dundar M. A., Dhaliwal G. S., Ayorinde E.
POLYMER ENGINEERING AND SCIENCE , cilt.60, sa.11, ss.2930-2944, 2020 (SCI-Expanded, Scopus) identifier identifier

23. Investigation for impact behavior of acrylonitrile-butadiene-styrene amorphous thermoplastic

Dundar M. A., Dhaliwal G. S.
POLYMER TESTING , cilt.89, 2020 (SCI-Expanded, Scopus) identifier identifier

24. Four Point Flexural Response of Acrylonitrile-Butadiene-Styrene

Dhaliwal G. S., Dundar M. A.
JOURNAL OF COMPOSITES SCIENCE , cilt.4, sa.2, 2020 (ESCI, Scopus) Creative Commons License identifier identifier

25. Sound and vibration considerations of some materials for automotive engineering applications

Al-Zubi M., Ayorinde E., Alshabatat N., Dundar M. A., Murty Y.
American Journal of Applied Sciences , cilt.11, sa.10, ss.1784-1797, 2014 (Scopus) Creative Commons License identifier

26. Vibro-Acoustic Characterization and Optimization of Periodic Cellular Material Structures (PCMS) for NVH Applications

Dündar M. A.
Journal of Materials Science Research , cilt.2, ss.1-11, 2013 (Hakemli Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 12

1. PREDICTING THE THREE-POINT BENDING BEHAVIOR OF 3D-PRINTED ACRYLONITRILE STYRENE ACRYLATE AMORPHOUS THERMOPLASTIC: A NUMERICAL STUDY

Dündar M. A., Özenç O.
8. INTERNATIONAL ANTALYA SCIENTIFIC RESEARCH AND INNOVATIVE STUDIES CONGRESS, Antalya, Türkiye, 25 - 27 Ocak 2025, ss.3, (Özet Bildiri) Creative Commons License Sürdürülebilir Kalkınma

2. ULTRA YÜKSEK MOLEKÜL AĞIRLIKLI POLİETİLEN MALZEMENİN BASMA DENEYİNDE FARKLI DEFORMASYON HIZLARI ALTINDA MEKANİK ÖZELLİKLERİNİN İNCELENMESİ

Ercan K., Dündar M. A., Akyıldız H. K.
AICMES 2nd INTERNATIONAL CONFERENCE ON CURRENT SCIENTIFIC STUDIES , Tel-Aviv-Yafo, İsrail, 6 - 09 Nisan 2023, cilt.2, sa.11, ss.62-69, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

3. EXPERIMENTAL MODAL ANALYSIS OF NATURAL FIBER REINFORCED ACRYLONITRILEBUTADIENE- STYRENE (ABS) THERMOPLASTIC BIOCOMPOSITES

Özenç O., Nuralıyev M., Dündar M. A., Şahin D. E.
ICHEAS 4th International Conference On Health, Engineering And Applied Sciences, Dubai, Birleşik Arap Emirlikleri, 14 - 16 Nisan 2023, ss.194-205, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

4. NUMERICAL INVESTIGATION OF DYNAMIC CHARACTERISTICS OF HEMP PARTICLE-ADDED ACRYLONITRILE-BUTADIENESTYRENE (ABS) THERMOPLASTIC BIOCOMPOSITES

Özenç O., Nuralıyev M., Dündar M. A., Şahin D. E.
ICHEAS 4th International Conference On Health, Engineering And Applied Sciences, Dubai, Birleşik Arap Emirlikleri, 14 - 16 Nisan 2023, ss.206-217, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

5. ULTRA YÜKSEK MOLEKÜL AĞIRLIKLI POLİETİLEN MALZEMENİN EĞİLME DAVRANIŞININ BELİRLENMESİ: DENEYSEL VE NÜMERİK ÇALIŞMA

Ercan K., Dündar M. A., Akyıldız H. K.
BALKAN 7TH INTERNATIONAL CONFERENCE, Skopje, Makedonya, 3 - 05 Şubat 2023, cilt.1, ss.134-144, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

6. MODAL ANALYSIS ON DETERMINATION OF DYNAMIC PARAMETERS OF RECTANGULAR UHMWPE PLATES

Özenç O., Dündar M. A., Şahin D. E.
6th INTERNATIONAL CONGRESS ON INNOVATIVE SCIENTIFIC APPROACHES, Samsun, Türkiye, 19 - 20 Aralık 2021, ss.338-347, (Tam Metin Bildiri)

7. Determination of impact behavior of ABS from acoustic emission, ultrasound and optics

Dundar M. A., Ayorinde E., Al-Zubi M.
ASME 2015 International Mechanical Engineering Congress and Exposition, IMECE 2015, Texas, Amerika Birleşik Devletleri, 13 - 19 Kasım 2015, cilt.9-2015, (Tam Metin Bildiri) identifier

8. Investigation of some circular membrane-patch acoustic meta-materials

Ayorinde E., Al-Zubi M., Mohammad F., Dundar M. A.
ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE 2013, San Diego, CA, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013, cilt.9, (Tam Metin Bildiri) identifier

9. Plate vibration and geometry study of impact-control ABS

Dundar M. A., Ayorinde E.
ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE 2013, San Diego, CA, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013, cilt.9, (Tam Metin Bildiri) identifier

10. Experimental and numerical analysis of membrane-patterned meta-materials

Ayorinde E., Al-Zubi M.
ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012, Houston, TX, Amerika Birleşik Devletleri, 9 - 15 Kasım 2012, cilt.8, ss.303-306, (Tam Metin Bildiri) identifier

11. Acoustic and vibration responses of lexan plate constructions

Al-Zubi M., Dundar A., Ayorinde E., Witus G.
ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012, Houston, TX, Amerika Birleşik Devletleri, 9 - 15 Kasım 2012, cilt.8, ss.297-301, (Tam Metin Bildiri) identifier

12. Investigation of layered and periodic pattern material structures for automotive vibro-acoustic abatement

Al-Zubi M., Ayorinde E., Witus G., Dundar A.
ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011, Denver, CO, Amerika Birleşik Devletleri, 11 - 17 Kasım 2011, cilt.8, ss.189-197, (Tam Metin Bildiri) identifier
Metrikler

Yayın

38

Yayın (WoS)

18

Yayın (Scopus)

25

Atıf (WoS)

108

H-İndeks (WoS)

6

Atıf (Scopus)

118

H-İndeks (Scopus)

7

Atıf (Scholar)

201

H-İndeks (Scholar)

9

Atıf (TrDizin)

8

H-İndeks (TrDizin)

2

Toplam Atıf Sayısı

199

Proje

4

Tez Danışmanlığı

1

Açık Erişim

3
BM Sürdürülebilir Kalkınma Amaçları