Publications & Works

Publication Network
Articles 22
All (22)
SCI-E, SSCI, AHCI (11)
SCI-E, SSCI, AHCI, ESCI (12)
ESCI (1)
Scopus (12)
TRDizin (3)
Other Publications (6)

1. Influence of mechanical vibration, mold type, and grain refiner on the microstructure and mechanical behavior of A356 aluminum alloy

Çolak M., Murat M., Taş Z., Deniz G.
Turkish Journal of Electromechanics and Energy , vol.10, no.3, pp.93-100, 2025 (Peer-Reviewed Journal)

2. Corrosion and Wear Performance of Electroless Ni-B-Coated Spring Steels for High-Speed Railway Applications: Effect of Post-Deposition Heat Treatment

Dursunlar M., Taş Z., Kocabaş M., Çelebi M., Akgül B.
JOM , vol.77, no.11, pp.1-18, 2025 (SCI-Expanded, Scopus) identifier

3. Yüksek hızlı demir yolu bağlantı sistemlerinin geliştirilmiş korozyon direnci: 38Si7 çeliği üzerine ZnAl kaplama

Dursunlar M., Taş Z., Çelebi M., Akgül B., Çuğ H.
KOVOVE MATERIALY , vol.63, no.2, pp.119-134, 2025 (SCI-Expanded, Scopus) Sustainable Development

4. Ray Bağlantı Elemanlarının Deneysel ve Yapay Zekâ Destekli Korozyon Direncinin İncelenmesi

Dursunlar M., Taş Z.
Demiryolu Mühendisliği , no.21, pp.83-95, 2025 (TRDizin) Sustainable Development identifier

5. Comparative analysis of wear properties between electroless Ni-B coating and commercial ZnAl coating on 38Si7 steel used in railway system

Dursunlar M., Taş Z., Akgül B., Güler O., Çelebi M.
ENGINEERING SCIENCE AND TECHNOLOGY, AN INTERNATIONAL JOURNAL , no.58, pp.1-22, 2024 (SCI-Expanded, Scopus) Sustainable Development

6. Electroless Ni-B Coating and Heat Treatment Application for Rail Fastener Elements

Dursunlar M., Taş Z.
Demiryolu Mühendisliği , no.20, pp.67-78, 2024 (TRDizin) Sustainable Development identifier

7. The Effect of Grain Refiner and Mechanical Vibration on Feedability in Sand and Plaster Mold Casting of Etial 177 Aluminum Alloy

Kanlıca M. M., Taş Z., Çolak M.
Eastern Anatolian Journal of Science , vol.9, no.2, pp.1-9, 2023 (Peer-Reviewed Journal)

8. TOZALTI KAYNAĞIYLA BİRLEŞTİRİLMİŞ API X52 ÇELİĞİNİN MİKROYAPI VE MEKANİK ÖZELLİKLERİNİN İNCELENMESİ

Taş Z.
Technological Applied Sciences , vol.13, no.1, 2018 (ESCI) Sustainable Development

9. Examination of Mechanical Properties and Weld Zone of X70 Pipe Steel After Welding

TAŞ Z.
İnternational Journal of Scientific Technology Research , vol.6, pp.148-152, 2017 (Scopus)

10. Mechanical properties of pipeline steel welds

TAŞ Z.
MATERIALS TESTING , vol.59, no.3, pp.295-301, 2017 (SCI-Expanded, Scopus) identifier identifier

11. Tribologische Untersuchungen an PEEK- und Bronze-Basis-Werkstoffen

Taş Z.
MATERIALPRUEFUNG/MATERIALS TESTING , no.53, pp.221-228, 2011 (SCI-Expanded, Scopus)

12. Tribological examinations of PEEK- and bronze-based materials

Tas Z.
MATERIALS TESTING , vol.53, no.4, pp.221-228, 2011 (SCI-Expanded, Scopus) identifier identifier

13. Properties of Alumina Coating Formed by Microarc Oxidation Technique on 6061 Aluminum Alloy

Polat A., USTA M., MAKARACI M., Ata A., TAŞ Z.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , vol.45, no.12, pp.594-609, 2008 (SCI-Expanded, Scopus) identifier identifier

14. An examination of the friction behaviour and wear characteristics of some sealants

TAŞ Z., Celik C., Polat A.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , vol.45, no.2, pp.72-85, 2008 (SCI-Expanded, Scopus) identifier identifier

15. UNTERSUCHUNG DER KRAFTEINLEITUNG BEI KUGELFÖRMIGEN TRAGWERKEN

Taş Z.
Celal Bayar Üniversitesi Fen Bilimleri Dergisi , vol.3, no.2, pp.133-142, 2007 (Peer-Reviewed Journal)

16. A Determination of Interlaminar Shear Strength for Two-Layered GFRP/CFRP Flexing Carriers in a Fiber-Reinforced Composite Etructure

Taş Z.
PRAKTISCHE METALOGRAPHIE , no.XLIV, pp.259-274, 2007 (SCI-Expanded, Scopus)

17. Boru Çeliklerinin Kırılma Tokluğunun J-Integral Yöntemiyle Belirlenmesi

Taş Z., Polat A.
Celal Bayar Üniversitesi Soma Teknik Bilimler Dergisi , vol.1, no.7, pp.1-13, 2007 (Peer-Reviewed Journal)

18. Bestimmung der interlaminaren Schubfestigkeit von Faserverbundwerkstoffen durch Zugversuch

Taş Z.
KGK KAUTSCHUK GUMMI KUNSTSTOFFE , no.D4093, pp.604-608, 2006 (SCI-Expanded, Scopus)

19. Çeliklerde Termomekanik İşlem Uygulamaları

Taş Z.
Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi , vol.22, no.1-2, pp.171-178, 2006 (Peer-Reviewed Journal)

20. Analytische Ermittlung der Schubspannungsverteilung des Mehrschichtverbundes bei Querkraftbiegung

Taş Z.
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , vol.12, no.2, pp.151-160, 2006 (TRDizin)

21. Nb-V- Alaşımlı Çeliklerde Mikroyapı Mekanik Özellikler İlşkisi

Taş Z.
Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi , no.22 (1-2), pp.152-160, 2006 (Peer-Reviewed Journal)

22. Relationship Between the Microstructure and Fracture Toughness of Microalloyed (API 5L X65) Steels

Taş Z.
PRAKTISCHE METALOGRAPHIE , vol.42, no.2005, pp.290-303, 2005 (SCI-Expanded, Scopus)
Metrics

Publication

25

Publication (WoS)

13

Publication (Scopus)

13

Citation (WoS)

5

H-Index (WoS)

1

Citation (Scopus)

7

H-Index (Scopus)

1

Citation (Scholar)

5

H-Index (Scholar)

2

Project

6

Thesis Advisory

5
UN Sustainable Development Goals